How To Avoid Refrigerator Problems And Damages

Always remember that appliances do not last forever. Surely you will encounter problems again and again. Refrigerators are not exempt. Although they generally last longer compared to other appliances, they are not yet invulnerable to problems and damages.

However, you can do many things to maintain the constant functions of your refrigerator. Here are some tips on how to avoid common problems and damages in the refrigerator:

1. Try to keep a good temperature inside the refrigerator.

Do not set it to an extremely low temperature. Actually, it is better to set the temperature between 37 and 40 degrees Fahrenheit. This will help minimize the growth of bacteria without freezing products that do not freeze well, such as milk and other dairy products.

Also, it will prevent the parts of the freeze from turning into ice or turning into ice. When the temperature drops, this could cause refrigeration problems in the refrigerator.

2. Keep it clean all the time.

If spills are present, clean them with a damp cloth. Make sure the inside of the refrigerator stays dry and clean. This will prevent molds from appearing inside. Also clean the bottom of condiments like mustard or ketchup. They can leave stains inside the refrigerator.

3. Avoid closing the refrigerator door.

This could damage the rubber gasket of the machine. This is responsible for sealing the cold air inside the machine. If the rubber gasket is damaged, the cold air may escape and your refrigerator may have trouble maintaining the correct temperature level inside. This could lead to an increase in energy consumption.

Close the door carefully. From time to time check the reliability of the rubber gasket. To do that, simply insert a dollar bill. Remove it. If there is no resistance, you may need to replace the gasket.

4. Vacuum the condenser coils.

The coils expel hot air. You should vacuum it regularly to prevent the accumulation of dirt. This will ensure that the machine will expel hot air efficiently.

You may need to remove the screws that seal the back panel of the refrigerator. Be careful when removing the screws. You do not want to break the back panel.

5. Replace the water filter if your refrigerator has a built-in water dispenser.

This can accumulate hard minerals and debris after some time. It is recommended to replace the filter two or three times a year. This will ensure that the water flows easily.

Leave a comment